Place metal leveling shims under the cabinet chassis until the units are perfectly vertical and horizontally level. Use a spirit level on the top rail. Tighten the anchor bolts to a torque specification of 4. Electrical and Cabling Architecture
Use a laser level or string line to ensure all cabinets are perfectly parallel and aligned along the front edge. Misalignment will cause optical sensor faults. 4. Mechanical Anchoring and Leveling
Adjust the opening/closing speed based on site traffic needs.
Manually push the wings to verify they move freely without rubbing against the cabinet structure. 6. Commissioning and Calibration gunnebo speedstile fl installation manual
Connect the fire alarm override relay to the dedicated safety input. This input must be configured as Normally Closed (NC) so that an open circuit automatically opens the barriers. 5. Glass Wing Installation
Tighten the expansion anchors to the manufacturer's specified torque rating. Re-verify the level after tightening. 5. Electrical Connections and Wiring
If you need help with a specific part of the setup, let me know: Place metal leveling shims under the cabinet chassis
Mark the exact footprint of the Master and Slave cabinets using the positioning templates provided in the shipping kit.
Follow these procedures to ensure the units are aligned and secured correctly: Gunnebo SpeedStile FL
Test the opening and closing mechanism to ensure the wings function smoothly. Electrical and Cabling Architecture Use a laser level
Use a spirit level to ensure the cabinets are perfectly horizontal and vertical. Use shims if necessary to level the base. Step 3: Electrical Connections Connect the main power supply.
I can provide the exact wiring diagrams or diagnostic steps for your situation. Share public link
Ensure that upon a fire alarm signal, the panels open automatically and stay open. 6. Maintenance and Safety Cleaning: Use non-abrasive cleaners for glass panels. Lubrication: Regularly check the motor and hinge points.