Fagor Eco Plus Fa 15-20 Manual Jun 2026

: A full 23-page Fagor FEB-20E User Manual is available for free browsing.

Ensure the system pressure remains within the optimal zone (typically 1.0 to 1.5 bar when cold). Annual Professional Service

If a fault code appears, consult the specific manual for the FA 15-20, as error codes might differ from the FEB-20E model. 5. Maintenance for Longevity

This article is an informational guide compiled from common knowledge and generic pressure cooker protocols. Always refer to your device’s physical label for specific technical ratings. For part replacements, confirm compatibility by measuring the inner diameter (approx. 28cm for the FA 15-20). Fagor Eco Plus Fa 15-20 Manual

Warning: Do not overfill the unit past 2.0 bar. If you accidentally add too much water, you will need to bleed water out from a radiator valve using a radiator key until the pressure drops back down to safety limits. 6. Professional Servicing and Longevity Tips

bar (usually shown in the green zone) when the system is cold.

| Feature | Specification | | :--- | :--- | | | Variable (FA 15: 15kg / FA 20: 20kg) | | Control System | Microprocessor with Digital Display | | Water System | Eco-Plus Recirculation & Drain Valve | | Power Supply | 400V AC, 3-Phase + Neutral + Earth | | Total Power | Approx. 4.5 kW – 6.5 kW (Model dependent) | | Water Inlet Pressure | 0.2 – 0.8 MPa (2 – 8 bar) | | Dimensions (HxWxD) | Standard Industrial Profile (See Diagram A) | | Spin Speed | Variable (up to 700 RPM) | : A full 23-page Fagor FEB-20E User Manual

: Specific requirements for flue positioning and electrical wiring.

, the boiler is managed via a microprocessor-controlled system for immediate response. Boiler Ready

If you'd like to share any error codes your boiler is displaying, I would be happy to help you interpret them based on available information. For part replacements

feb-20e uk ecoplus user instructions and technical instructions

Even with the best care, issues can arise. Here is a troubleshooting table based directly on FAQ responses in the .