Epson M2120 Resetter !full! Jun 2026

Most modern resetters for the M2120 are "Hardware ID" locked or require a license key. In the past, these tools were free, but now, reliable versions are often sold for a small fee ($5–$10) by third-party developers. A helpful tip: If a site claims to offer a 100% free resetter without any catch, be very suspicious.

: Once the program opens, click the "Select" button. From the list, choose your specific printer model (Epson ET-M2120, M2120 Series, or a similar variant) and the USB port your printer is connected to. Click "OK" to confirm.

: A pop-up will ask you to turn off the printer. Power it down and then turn it back on to finalize the reset. Important Safety Warning Physical Hardware Epson M2120 Resetter

Using an Epson M2120 resetter can benefit you in several ways:

: Often referred to as "Service Software," this is a more comprehensive tool used by technicians to reset waste ink counters, calibrate print heads, and run deep cleanings. Most modern resetters for the M2120 are "Hardware

If a software resetter is unavailable, you will need to bring the printer to an Epson authorized service center to have the pads replaced and the counter reset professionally.

: A popular third-party tool that supports the M2120. It allows you to read counter levels for free but requires purchasing a "Reset Key" to perform the actual reset. : Once the program opens, click the "Select" button

Disclaimer: This article is for informational purposes only. Always ensure you are using genuine software and consider professional servicing for hardware maintenance.

: After the printer restarts, go back to the WIC Reset Utility and click "Read waste counters" again. The percentage should now show 0% (or the new level). Print a test page to confirm normal operation.

※ If you don’t physically manage the waste ink, the pad will overflow and damage the printer.