Wallbox Firmware Update | Vestel

Solution: Perform a hard reboot (cut power for 60 seconds). If that fails, re-check the network configuration in the app. Charging starts and then stops.

Here is a comprehensive guide on how to update your Vestel Wallbox firmware.

Look for a section labeled , Maintenance , or Firmware Update . vestel wallbox firmware update

Keeping your electric vehicle (EV) charging station updated is just as important as updating your smartphone or vehicle software. For owners of Vestel Wallbox chargers—such as the popular EVC04 series—firmware updates ensure compatibility with new EV models, patch security vulnerabilities, and unlock smart charging features.

Most connected models, such as those branded by E.ON or used with the Drive Green app, can receive Over-the-Air (OTA) updates. Vestel EVC04 - Commissioning – gridX HelpCenter v3.5 Solution: Perform a hard reboot (cut power for 60 seconds)

Before attempting any firmware update on your Vestel Wallbox, complete these preparatory steps to avoid interrupting the installation process:

The Critical Role of Firmware Updates for Vestel Wallbox Systems Here is a comprehensive guide on how to

2025-03-15 14:02:31 [INFO] Firmware update requested for WB-123 (v2.1.3 → v2.2.0) 2025-03-15 14:02:32 [INFO] UpdateFirmware.req sent to WB-123 2025-03-15 14:02:35 [INFO] WB-123: Downloading from CDN (45%) 2025-03-15 14:02:50 [INFO] WB-123: Downloaded, checksum valid 2025-03-15 14:02:51 [INFO] WB-123: Installing firmware 2025-03-15 14:03:20 [INFO] WB-123: Firmware installed, rebooting 2025-03-15 14:03:45 [INFO] WB-123: Reconnected to OCPP, new version v2.2.0

If the unit shows no LEDs and does not beep after a USB update, you have overwritten the bootloader. This requires a JTAG programmer and direct flash via the serial header. Contact Vestel service (cost approx. €80 for reprogramming, excluding shipping).

Current Firmware: v2.1.3 Last Update: 2025-01-10

. These updates are primarily distributed over-the-air (OTA) by backend providers like or can be requested directly from Vestel Support for manual installation. Home Assistant Community Key Benefits of Recent Updates The primary motivation for updating is the introduction of Modbus TCP